manualshive.com logo in svg

Kyocera KM-2560, Service Manual

The Kyocera KM-2560 is a high-performance multifunctional printer designed for office use. With its advanced features and efficient functionality, this product delivers exceptional quality prints, copies, and scans. To access the Service Manual and user manual for free, you can conveniently download them from manualshive.com.

Share
Download
background image

2H0/2HZ-1

1-1-1

1-1 Specifications

1-1-1  Specifications

Machine

Type ................................................ Desktop
Printing method............................... Electrophotography by semiconductor laser
Supported original types ................. Sheets, books and three-dimensional objects

Maximum original size: A3/Ledger

Original feed system ....................... Fixed
Paper weight................................... Cassette: 60 to 120 g/m

2

 (Duplex: 60 to 80 g/m

2

)

MP tray  : 45 to 200 g/m

2

Paper type ...................................... Cassette: Plain, Rough, Vellum, Recycled, Preprinted, Bond, Color (Colour), 

Prepunched, Letterhead, Thick paper, High Quality, Custom 1 to 8

MP tray  : Plain, Transparency (OHP film), Rough, Vellum, Labels, Recycled, 

Preprinted, Bond, Cardstock, Color (Colour), Prepunched, Letterhead, 
Thick paper, Envelope, High Quality, Custom 1 to 8

Paper size....................................... Cassette: Ledger, Legal, Oficio II, 8.5 x 13.5", Letter, LetterR, StatementR, A3, B4,

A4, A4R, B5, B5R, A5R, Folio, 8K, 16K, 16KR

MP tray  : Ledger, Legal, Oficio II, 8.5 x 13.5", Letter, LetterR, Executive, StatementR,

A3, B4, A4, A4R, B5, B5(ISO), B5R, A5R, B6R, A6R, Oufuku Hagaki,
Hagaki, Envelope DL, Envelope C5, Envelope C4, Comm.#10, Comm.#9,
Comm.#6-3/4, Monarch, Youkei 2, Youkei 4, Folio, 8K, 16K, 16KR

Zoom level ...................................... Manual mode: 25 to 400%, 1% increments

Auto mode: Preset Zoom

Printing speed................................. 25 ppm model

   Simplex

Duplex

   A3/11 x 17" : 12.5 sheets/min.

A3/11 x 17" : 9 sheets/min.

   B4/8 

1/2

 x 14": 12.5 sheets/min.

B4/8 

1/2

 x 14": 9 sheets/min.

   A4/11 x 8 

1/2

": 25 sheets/min.

A4/11 x 8 

1/2

" : 19 sheets/min.

   A4R/8 

1/2

 x 11": 17.5 sheets/min.

A4R/8 

1/2

 x 11": 10 sheets/min.

   B5   : 25 sheets/min.

B5   : 20 sheets/min.

   B5R: 20 sheets/min.

B5R: 11 sheets/min.

   A5R: 14 sheets/min.

A5R: 14 sheets/min.

30 ppm model
   Simplex

Duplex

   A3/11 x 17" : 15 sheets/min.

A3/11 x 17" : 9 sheets/min.

   B4/8 

1/2

 x 14": 15 sheets/min.

B4/8 

1/2

 x 14": 10 sheets/min.

   A4/11 x 8 

1/2

": 30 sheets/min.

A4/11 x 8 

1/2

" : 20 sheets/min.

   A4R/8 

1/2

 x 11": 22 sheets/min.

A4R/8 

1/2

 x 11": 11 sheets/min.

   B5   : 30 sheets/min.

B5   : 21 sheets/min.

   B5R: 20 sheets/min.

B5R: 11 sheets/min.

   A5R: 14 sheets/min.

A5R: 14 sheets/min.

First copy time ................................ 4.7 s or less
Warm-up time ................................. 29 s (room temperature 22

°

C/71.6

°

F, 60% RH)

Recovery from low power mode: 10 s (room temperature 22

°

C/71.6

°

F, 60% RH)

Recovery from sleep mode: 15 s (room temperature 22

°

C/71.6

°

F, 60% RH)

Paper capacity ................................ Cassette : 500 sheets (80 g/m

2

)

MP tray : 200 sheets (80 g/m

2

)

Output tray capacity........................ Top tray : 250 sheets (80 g/m

2

)

  150 sheets (80 g/m

2

, with job separator)

  100 sheets (80 g/m

2

, with built-in finisher)

Continuous copying ........................ 1 to 999 sheets
Light source .................................... Inert gas lamp
Scanning system ............................ Flat bed scanning by CCD image sensor
Photoconductor............................... a-Si (drum diameter 30 mm)
Image white system ........................ Semiconductor laser
Charging system............................. Single positive corona charging
Developing system ......................... Dry, reverse developing (single component system)

Developer: 1-component, magnetism toner
Toner replenishing: automatic from a toner container

Transfer system .............................. Transfer roller
Separation system .......................... Separation electrode
Cleaning system ............................. Cleaning blade and roller

Summary of Contents for KM-2560









































































































































































































































































































































































































Reviews:

No comments

Related manuals for KM-2560

Canon PIXMA MX882 Series Network Setup Manual preview
PIXMA MX882 Series
Brand: Canon Pages: 34
Canon MX470 Getting Started preview
MX470
Brand: Canon Pages: 4
Canon MX470 User Manual preview
MX470
Brand: Canon Pages: 913
Canon Laser Class 700 Series Setup Manual preview
Laser Class 700 Series
Brand: Canon Pages: 30
Canon Laser Class 700 Series Datasheet preview
Laser Class 700 Series
Brand: Canon Pages: 6
Canon Laser Class 700 Series Specification preview
Laser Class 700 Series
Brand: Canon Pages: 6
Canon Laser Class 700 Series Network Manual preview
Laser Class 700 Series
Brand: Canon Pages: 108
Canon PIXMA MX860 series Network Manual preview
PIXMA MX860 series
Brand: Canon Pages: 9
Canon imagePROGRAF iPF9400 Brochure & Specs preview
imagePROGRAF iPF9400
Brand: Canon Pages: 8
Canon PIXMA MX860 series Getting Started Manual preview
PIXMA MX860 series
Brand: Canon Pages: 93
Canon MP980 series Manual preview
MP980 series
Brand: Canon Pages: 20
Canon PIXMA MX922 Setup Manual preview
PIXMA MX922
Brand: Canon Pages: 30
Canon PIXMA MX922 Easy Setup preview
PIXMA MX922
Brand: Canon Pages: 2
Oki 86 Specifications preview
86
Brand: Oki Pages: 4
JCM GEN5 Series Quick Reference Manual preview
GEN5 Series
Brand: JCM Pages: 22
Datamax MP-Compact4 Network Manual preview
MP-Compact4
Brand: Datamax Pages: 19
Datamax ST-3210 Programmer'S Manual preview
ST-3210
Brand: Datamax Pages: 26
Samsung CLX-9350ND Service Manual preview
CLX-9350ND
Brand: Samsung Pages: 549

Brands by name

Popular brands

Load more brands