Kyocera KM-2560, Service Manual

Page: 125 / 392

2H0/2HZ
1-3-89
(6) Printer settings
Emulation
Selection of emulation
Select the emulation for operating this machine by the
command for other printers.
1. Press [Change] of Emulation.
2. Select the desired emulation.
3. Press [OK].
4. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.
Setting of alternative emulation
When you have selected [KPDL (Auto)] as emulation
mode, you can switch KPDL and another emulation
mode (alternative emulation) automatically according to
the data to print.
1. Press [Change] of Emulation, [KPDL (Auto)] and
[Alt Emulation].
2. Select the desired alternative emulation.
3. Press [OK].
4. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.
Setting of KPDL error report
When an error has occurred during printing in KPDL
emulation mode, set whether or not the error report is
output.
1. Press [Change] of Emulation, [KPDL] or [KPDL
(Auto)], [KPDL Error Report]
2. Press [On] or [Off].
3. Press [OK].
4. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.
Setting of page size and pen
When you have selected KC-GL as emulation mode, you
can set the page size, eight kinds of pens, and thickness
of each pen.
1. Press [Change] of Emulation, [KC-GL] and [Page
Set.
2. Select the paper size.
3. Press [OK].
4. Press [Pen Adjust], [Change] of the pen to change
its thickness (1 to 8).
5. Press [+] or [-] to set the pen thickness.
6. Press [OK].
7. Press the power key, and after confirming that the
power key/indicator and memory indicator have
turned off, turn the main power switch off and on.
Resolution
Select default resolution.
1. Press [Change] of Resolution.
2. Select default resolution.
3. Press [OK].
EcoPrint
EcoPrint conserves toner when printing.
1. Press [Change] of EcoPrint.
2. Press [Off] or [On].
3. Press [OK].
KIR
The machine is equipped with the smoothing KIR func-
tions, which realizes exquisite output resolution of about
2400 dpi x 600 dpi.
1. Press [Change] of KIR.
2. Press [On] or [Off].
3. Press [OK].
Override A4/Letter
Select whether treating A4 size and Letter, which are
similar in size, as the same size when printing.
1. Press [Change] of Override A4/Letter.
2. Press [Off] or [On].
3. Press [OK].
Duplex
Select binding orientation for duplex mode.
1. Press [Change] of Duplex.
2. Select [1-sided], [2-sided Bind ShortEdge], or
[2-sided Bind LongEdge].
3. Press [OK].
Copies
Set the default number of copies.
1. Press [Change] of Copies.
2. Set the default number of copies using the [+]/[-] or
numeric keys.
3. Press [OK].
Orientation
Set the default orientation.
1. Press [Change] of Orientation.
2. Press [Portrait] or [Landscape].
3. Press [OK].
Wide A4
Increase the number of characters per line for A4 paper.
1. Press [Change] of Wide A4.
2. Press [Off] or [On].
3. Press [OK].
Form feed timeout
Receiving print data from the computer, the machine may
sometimes have to wait if there is no information identify-
ing the last page has no data any more to be printed.
When the preset timeout passes, the machine automati-
cally prints paper.
1. Press cursor down key and [Change] of Form Feed
Timeout.
2. Press [+] or [-] to set the form feed timeout.
3. Press [OK].