2H0/2HZ
1-4-3
Section
Description
Conditions
Specified time
System
04
Cover open
Cover is open during copying.
-
05
Secondary paper feed
does not start
Secondary paper feed does not start within specified time
of arrival of paper at the registration section.
30 s
Paper
feed
section
10
No paper feed from
cassette 1
Feed switch 1 (FSW1) does not turn on within the speci-
fied time of upper paper feed clutch (PFCL-U) turning on;
the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time.
1864 ms
11
No paper feed from
cassette 2
Feed switch 2 (FSW2) does not turn on within the speci-
fied time of lower paper feed clutch (PFCL-L) turning on;
the clutch is then successively turned off for 1 s and
turned back on, but the switch again fails to turn on within
the specified time.
2121 ms
12
No paper feed from
optional cassette 3
Feed switch 3 (FSW3) does not turn on within the speci-
fied time of paper feeder paper feed clutch 1 (PFPFCL1)
turning on; the clutch is then successively turned off for 1
s and turned back on, but the switch again fails to turn on
within the specified time.
-
Left cover 3 is opened in prior to feed switch 3 (FSW3) is
turned on.
-
13
No paper feed from
optional cassette 4
The paper feeder feed switch (PFFSW) does not turn on
within the specified time of paper feeder paper feed
clutch 2 (PFPFCL2) turning on; the clutch is then succes-
sively turned off for 1 s and turned back on, but the switch
again fails to turn on within the specified time.
-
Left cover 3 is opened in prior to the paper feeder feed
switch (PFFSW) is turned on.
-
14
No paper feed from MP
tray
The MP feed switch (MPFSW) does not turn on within the
specified time of the MP paper feed clutch (MPPFCL)
turning on; the clutch is then successively turned off for 1
s and turned back on, but the switch again fails to turn on
within the specified time.
993 ms
18
Misfeed in vertical
paper conveying sec-
tion
Feed switch 1 (FSW1) does not turn off within specified
time of feed switch 2 (FSW2) turning on (paper feed from
cassette 2).
1314 ms
Feed switch 1 (FSW1) does not turn on within specified
time of feed switch 2 (FSW2) turning on (paper feed from
cassette 2).
1314 ms
Feed switch 1 (FSW1) does not turn off within specified
time of feed switch 2 (FSW2) turning on (paper feed from
optional cassette 3, 4).
1386 ms
Feed switch 1 (FSW1) does not turn on within specified
time of feed switch 2 (FSW2) turning on (paper feed from
optional cassette 3, 4).
1386 ms
Feed switch 2 (FSW2) does not turn off within specified
time of feed switch 3 (FSW3) turning on (paper feed from
optional cassette 3, 4).
1686 ms
Feed switch 2 (FSW2) does not turn on within specified
time of feed switch 3 (FSW3) turning on (paper feed from
optional cassette 3, 4).
1686 ms
Summary of Contents for KM-2560
