1
SAFETY INSTRUCTIONS
6
OPTIWAVE 1010
www.krohne.com
10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en
1.1 Software history
"Firmware revision" and "Hardware revision" agree with NAMUR NE 53. These revisions each
have a series of numbers used to record the revision status of embedded software (firmware)
and hardware in electronic equipment assemblies. They give data on the type of changes made
and the effect that changes have on compatibility.
Data about software revisions is shown in the DTM for PACTware
™
. For more data, refer to
Information on page 52. If it is not possible to refer to data in the software, record the serial
number of the device (given on the device nameplate) and speak to the supplier.
1.2 Intended use
This radar level transmitter measures distance and level of liquids or the top of a float. It does
not touch the measured product.
This radar level transmitter can only be used if it is correctly installed and aligned on a bypass
chamber. The bypass chamber must be metallic and electrically conductive.
Release
date
Printed circuit
assembly
Firmware
revision
Hardware
revision
Changes and
compatibility
Documentation
2015-05-27
Converter and
sensor board
8.11.00
1.00.00
—
MA OPTIWAVE
1010 R01 + R02
2016-09-28
Converter and
sensor board
8.13.00
1.00.00
800 MHz frequency
sweep
MA OPTIWAVE
1010 R03
8.14.00
1 GHz frequency
sweep
CAUTION!
Responsibility for the use of the measuring devices with regard to suitability, intended use and
corrosion resistance of the used materials against the measured fluid lies solely with the
operator.
INFORMATION!
The manufacturer is not liable for any damage resulting from improper use or use for other than
the intended purpose.
