6
OPERATION
42
OPTIWAVE 1010
www.krohne.com
10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en
6.2 How to load settings from the device to PACTware
™
If the device operates with settings that are not used in PACTware
™
for that device, you can use
the "Load from device" function to send the device settings to PACTware
™
.
There are 3 alternative procedures.
•
Click on the Device button in the main toolbar.
•
Click on "Load from device" in the list.
i
End of the procedure.
•
Click on this icon (you can find this icon below the main toolbar).
i
End of the procedure.
CAUTION!
Make sure that the settings in the DTM and the device are regularly synchronized. If you do not
synchronize the settings, it is possible that settings in the DTM and the device are different. This
difference can have an effect on the performance of the device.
INFORMATION!
Multi-drop networks:
Multi-drop networks:
Multi-drop networks:
Multi-drop networks: Set the device address with the DTM. For more data, refer to HART on page
58.
Procedure 1: Click on "Load from device" in the Device menu
Figure 6-1: Click on "Load from device" in the Device menu
Procedure 2: Click on the "Load from Device" icon in the main toolbar
Figure 6-2: Click on the "Load from Device" icon in the main toolbar
