5
START-UP
40
OPTIWAVE 1010
www.krohne.com
10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en
5.3.6 Simulation window
Use this window to simulate measured data to make sure that the device operates correctly.
You can do one of these three procedures to open the Simulation window:
•
Open the window from the Start
Start
Start
Start window. Click on Start
Start
Start
Start in the DTM menu and then click on the
Simulation
Simulation
Simulation
Simulation button at the bottom of the Start
Start
Start
Start window.
•
Open the window from the main toolbar. Click on Device > Simulation
Device > Simulation
Device > Simulation
Device > Simulation.
•
Open the window from the Project
Project
Project
Project window. Right click on the device (OPTIWAVE 1010
OPTIWAVE 1010
OPTIWAVE 1010
OPTIWAVE 1010) in the
project list, then click on Simulation
Simulation
Simulation
Simulation.
Figure 5-8: DTM: Simulation screen
1
Use this menu to simulate changes in level or in current output
2
"Start simulation" button
3
Slider control to increase or decrease the simulated value
4
Simulation status: active (on) / inactive (off)
