OPERATION
6
47
OPTIWAVE 1010
www.krohne.com
10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en
6.5 How to change device settings
At the bottom right of the window there are 3 buttons. This function obeys FDT guidelines for
certification of the DTM.
When you change the value or parameter of a menu item, a pencil symbol is shown adjacent to
the changed value:
If the value is too large or too small, a red exclamation mark is shown adjacent to the incorrect
value:
CAUTION!
If you change the device settings, the DTM saves this data in the workstation. It does not send the
changes to the device. For more data about how to send changes to the device, refer to How to
store settings to the device from PACTware
™
on page 44.
Figure 6-7: "OK" or "Apply" updates the device settings data in the computer
Figure 6-8: Pencil symbol: changed value
Figure 6-9: Exclamation mark (!): the value is too large or too small
