KROHNE OPTIWAVE 1010 Handbook Download Page 29

Page: 29 / 92

ELECTRICAL CONNECTIONS

OPTIWAVE 1010

www.krohne.com

10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en

4.4 Protection category

•

Make sure that the gaskets are not damaged.

•

Make sure that the electrical cable is not damaged.

•

Make sure that the electrical cable agrees with the national electrical code.

•

Make a loop of cable in front of the device

to prevent leakage into the housing.

•

Tighten the cable feedthrough

INFORMATION!

The device fulfils all requirements per protection category IP66 / IP67. It also fulfils all
requirements per NEMA type 4X (housing) and type 6P (matching element).

DANGER!

Make sure that the cable gland is watertight.

Figure 4-4: How to make the installation agree with protection category IP67

Summary of Contents for OPTIWAVE 1010





























































































Search results

Summary of Contents for OPTIWAVE 1010

Reviews:

Related manuals for OPTIWAVE 1010

Brands by name

Popular brands

KROHNE OPTIWAVE 1010, Handbook

Search results

Summary of Contents for OPTIWAVE 1010

Reviews:

Related manuals for OPTIWAVE 1010

Brands by name

Popular brands