KROHNE OPTIWAVE 1010 Handbook Download Page 18

Page: 18 / 92

INSTALLATION

OPTIWAVE 1010

www.krohne.com

10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en

3.3 Transport

Depending on the version, the device will weight approx. 6.7...9.8 kg / 14.8...21.6 lb.

3.4 Pre-installation requirements

•

Make sure that there is sufficient space on all sides.

•

Protect the signal converter from direct sunlight.

•

Do not subject the signal converter to heavy vibrations.

WARNING!

OPTIWAVE1010 attached to a magnetic level indicator

OPTIWAVE1010 attached to a magnetic level indicator
The indicator column is made of Pyrex

glass. If you do not lift the device carefully, you can

cause damage to the magnetic level indicator.

Figure 3-2: Transportation

INFORMATION!

For more data about the magnetic level indicator, refer to the handbook for the BM 26 Basic /
Advanced.

INFORMATION!

Obey the precautions that follow to make sure that the device is correctly installed.

Summary of Contents for OPTIWAVE 1010





























































































Search results

Summary of Contents for OPTIWAVE 1010

Reviews:

Related manuals for OPTIWAVE 1010

Brands by name

Popular brands

KROHNE OPTIWAVE 1010, Handbook

Search results

Summary of Contents for OPTIWAVE 1010

Reviews:

Related manuals for OPTIWAVE 1010

Brands by name

Popular brands