TECHNICAL DATA
8
73
OPTIWAVE 1010
www.krohne.com
10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en
8.3 Measuring accuracy
Use these graphs to find the measuring accuracy for a given distance from the transmitter.
Measuring accuracy without calibration or after 2-point calibration (with a 2-point
calibration certificate)
Figure 8-2: Measuring accuracy / distance from the process connections of the bypass chamber, in mm
X: Distance from the top process connection [mm]
Y: Accuracy [+yy mm / -yy mm]
1
: 200 mm
2
: Float offset. Refer to the "Basic parameters" menu in the DTM for the float offset value.
Figure 8-3: Measuring accuracy / distance from the process connections of the bypass chamber, in inches
X: Distance from the top process connection [inches]
Y: Accuracy [+yy
¨
/ -yy
¨
]
1
: 7.9
¨
2
: Float offset. Refer to the "Basic parameters" menu in the DTM for the float offset value.
