KROHNE OPTIWAVE 1010 Handbook Download Page 25

Page: 25 / 92

INSTALLATION

OPTIWAVE 1010

www.krohne.com

10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en

wrench.

Lower the weather protection cover onto weather protection clamp until the hole for the lock
is in the slot at the front of the cover.

Put the R-clip into the hole at the front of the weather protection cover.

End of the procedure.

For more data about the overall dimensions of the weather protection, refer to

Dimensions and

weights on page 76.

3.9 How to open the weather protection

If your device has the weather protection option, obey the instructions that follow to get access to
the housing cover and the terminals compartment.

Remove the R-clip from the hole at the front of the weather protection cover.

Remove the weather protection cover.

End of the procedure.

Figure 3-10: How to open the weather protection

CAUTION!

Do not remove the safety cable.

Summary of Contents for OPTIWAVE 1010





























































































Search results

Summary of Contents for OPTIWAVE 1010

Reviews:

Related manuals for OPTIWAVE 1010

Brands by name

Popular brands

KROHNE OPTIWAVE 1010, Handbook

Search results

Summary of Contents for OPTIWAVE 1010

Reviews:

Related manuals for OPTIWAVE 1010

Brands by name

Popular brands