6
OPERATION
44
OPTIWAVE 1010
www.krohne.com
10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en
6.3 How to store settings to the device from PACTware
™
If PACTware
™
has settings that the device must use to operate correctly, you can use the "Store
to device" function to send the new settings to the device.
There are 3 alternative procedures.
•
Click on the Device button in the main toolbar.
•
Click on "Store to device" in the list.
i
End of the procedure.
•
Click on this icon (you can find this icon below the main toolbar).
i
End of the procedure.
CAUTION!
Make sure that the settings in the DTM and the device are regularly synchronized. If you do not
synchronize the settings, it is possible that settings in the DTM and the device are different. This
difference can have an effect on the performance of the device.
INFORMATION!
Multi-drop networks:
Multi-drop networks:
Multi-drop networks:
Multi-drop networks: Set the device address with the DTM. For more data, refer to HART on page
58.
Procedure 1: Click on "Store to device" in the Device menu
Figure 6-4: Click on "Store to device" in the Device menu
Procedure 2: Click on the "Store to device" icon in the main toolbar
Figure 6-5: Click on the "Store to device" icon in the main toolbar
