KROHNE OPTIWAVE 1010 Handbook Download Page 80 | Manualshive

Page: 80 / 92

background image

9

DESCRIPTION OF HART INTERFACE

80

OPTIWAVE 1010

www.krohne.com

10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en

9.5 Field Communicator 475 (FC 475)

The Field Communicator is a hand terminal from Emerson Process Management that is
designed to configure HART

®

and Foundation Fieldbus devices. Device Descriptions (DDs) are

used to integrate different devices into the Field Communicator.

9.5.1 Installation

System and software requirements for the Field Communicator

•

System card that includes the "Easy Upgrade Option"

•

Field Communicator Easy Upgrade Programming Utility

•

HART

®

Device Description file

For more data, refer to the Field Communicator User

’

s Manual.

9.5.2 Operation

The Field Communicator and the device's local display use almost the same procedures to
operate the signal converter. The online help for each menu item refers to the function number
given to each menu item on the local device display. Protection of settings is the same as on the
device's local display.

The Field Communicator always saves a complete configuration for communication with AMS.

For more data, refer to

HART

®

menu tree for Basic-DD on page 81.

9.6 Field Device Tool / Device Type Manager (FDT / DTM)

9.6.1 Installation

Before you operate the device, the Device Type Manager (Device DTM) must be installed in the
Field Device Tool Container. This .msi file is given on the DVD-ROM supplied with the device. You
can also download the file from our website. For installation and configuration data, refer to the
documentation that is supplied with the Device DTM on the DVD-ROM or in the "Downloads"
section of the website.

9.6.2 Operation

The DTM and the device's local display use almost the same procedures to operate the signal
converter. For more data, refer to

Operation on page 41.

CAUTION!

The Field Communicator cannot be used to correctly configure, operate or read data from the
device unless the Device Description (DD) file is installed.

INFORMATION!

The Field Communicator will not give you access to the service menu. A simulation is only
possible for current outputs.

«
...
78
79
80
81
82
...
»

Summary of Contents for OPTIWAVE 1010





























































































Reviews:

No comments

Related manuals for OPTIWAVE 1010

Brand: Yaesu Pages: 34

Brand: Yaesu Pages: 26

Brand: Yaesu Pages: 2

Brand: Yaesu Pages: 22

Brand: Yaesu Pages: 68

CoreBuilder 3500

Brand: 3Com Pages: 12

Brand: Monarch Pages: 2

Brand: elero Pages: 10

Centronic EasyControl EC415A-III

Brand: Becker Pages: 20

Brand: Eddystone Broadcast Pages: 42

Brand: NIVELCO Pages: 36

Brand: Vechline Pages: 9

Continental Electronics 802A

Brand: Varian Pages: 146

Brand: Neat Pages: 24

Brand: Craig Pages: 13

Brand: Cobra Pages: 7

Brand: hager Pages: 4

Brand: Leviton Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands