KROHNE OPTIWAVE 1010, Handbook

Page: 35 / 92

START-UP
5
35
OPTIWAVE 1010
www.krohne.com 10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en
5.3.3 Measurements window
Use this data to monitor level and distance.
You can do one of these three procedures to open the Measurements window:
• Open the window from the Start
Start Start
Start window. Click on Start
Start Start
Start in the DTM menu and then click on the
Measurements
Measurements Measurements
Measurements button at the bottom of the Start
Start Start
Start window.
• Open the window from the main toolbar. Click on Device > Measured value > Measurements
Device > Measured value > Measurements Device > Measured value > Measurements
Device > Measured value > Measurements.
• Open the window from the Project Project Project Project window. Right click on the device (OPTIWAVE 1010 OPTIWAVE 1010 OPTIWAVE 1010 OPTIWAVE 1010) in the
project list, then click on Measured value > Measurements Measured value > Measurements Measured value > Measurements Measured value > Measurements.
Figure 5-2: DTM: Measurement screen
1 Measurements menu. Make a selection from the measurement parameters (distance or level).
2 Measurement parameter
3
Measurement and measurement units