KROHNE OPTIWAVE 1010 Handbook Download Page 63

Page: 63 / 92

SERVICE

OPTIWAVE 1010

www.krohne.com

10/2016 - 4003537403 - MA OPTIWAVE 1010 R03 en

7.1 Periodic maintenance

No maintenance is necessary.

7.2 How to replace device components

7.2.1 Service warranty

Servicing by the customer is limited by warranty to:

•

The removal and installation of the housing. For more data, refer to

How to replace the signal

converter on page 64.

For more data on how to prepare the device before you send it back to the supplier, refer to
Returning the device to the manufacturer on page 66.

WARNING!

Only approved personnel can do an inspection of the device and repairs. If you find a problem,
send the device back to the supplier for inspection and/or repairs.

INFORMATION!

The converter housing can be detached from the process connection assembly under process
conditions.

Summary of Contents for OPTIWAVE 1010





























































































Search results

Summary of Contents for OPTIWAVE 1010

Reviews:

Related manuals for OPTIWAVE 1010

Brands by name

Popular brands

KROHNE OPTIWAVE 1010, Handbook

Search results

Summary of Contents for OPTIWAVE 1010

Reviews:

Related manuals for OPTIWAVE 1010

Brands by name

Popular brands