manualshive.com logo in svg

Konica Minolta FK-116, User Manual

Share
Download
Konica Minolta FK-116 User Manual Download Page 95

Utility Functions

4-9

CHECK DESTINATIONS ?

   OK = YES    (TX= START)

  NO.001= USA(NEW YORK)

     OK = YES        (DEL= NO)

    NO.002= _

                    (Fin.= START)

    NO.016= _

(Fin.= START)

2.

 

If the specified destination is correct, press the Yes key.

The display is changes and specifies the next
destination.

To clear the specified destination, press the No/Clear key.

3.

 

To continue specifying fax numbers with the Numeric keys, repeat the operation of
step 1 and 2.

4.

 

When all the receiving parties have been
selected for a broadcast, press the Start key.

Checking the Selected Destinations

The receiving parties you have selected can now
be checked to ensure that the correct
destinations have been selected.

1.

 

Press the Yes key.

Or you can skip checking the destinations selected by
pressing the Start key, which will begin the Broadcast
transmission procedure immediately.

2.

 

To check selected destinations press the Yes key.

The Message Display first shows the
receiving party specified for 001.

Yes

 No
C

Start

Yes

Yes

Start

Summary of Contents for FK-116

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands