Konica Minolta FK-116, User Manual

Page: 60 / 216

Basic FAX Operations
2-27
5 DEFAULT TX
*MEM. TX ADF TX
, & YES
If line is not available, the message “LINE IS BUSY” will
be displayed. The facsimile will retry based on the number
of redial attempts and intervals that were preset.
1. Press the Utility key 4 times then the display
appears the message “TX OPERATION”.
2. Press "5" from the Numeric keys. The following
message appears briefly to confirm your
selection.
3. Press or key to select MEM. TX or
ADF TX as the default setting.
Then press the Yes key.
4. Press the No/Clear key to restore the initial state.
Setting HEADER
Header prints information on the paper at the receiving end to identify that you
transmitted the document. The header appears at the top of each page in a document,
showing the sender name, page number, and the time of transmission.
1. Date of Transmission
2. Time of Transmission
3. Transmitter Name
4. Session number
5. Page number
1 2 3 4 5
MAY.29’2000 07:58 ABC #0641 P.009
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
No
C
TX OPERATION?
OK=YES / or 1-7
5
JKL
Yes
Utility
x 4