Konica Minolta FK-116, User Manual

Page: 200 / 216

Troubleshooting
9-4
Symptom Possible cause What to do
A darker density level for
the Manual Density Mode
has been specified.
§
Adjust the density level
to darker, using the
density adjustment keys.
Auto/
Photo
The surface of the original
glass is dirty.
§
Wipe the original glass
clean with a soft cloth.
The original document is
not securely placed upon
the original glass.
§
Place the original
document securely on
the original glass.
The copy appears blurred. The paper is damp.
§
Replace the paper.
The surface of the original
glass is dirty.
§
Wipe the original glass
clean with a soft cloth .
The original pad is dirty.
§
Wipe the original pad
clean with a soft cloth.
The original document is
a second-generation copy
or an OHP transparency
(or other translucent
media), etc.
§
Set a blank sheet of
paper over the original
document.
The copy has unintended
specks or spots.
Image from the backside
of a double-sided
document may be
reproduced when the front
side is copied.
§
Lower the density level
,using the density
adjustment keys.
Auto/
Photo
The original pad is dirty.
§
Wipe the original pad
clean with a soft cloth.
The selected paper size is
larger than the original
document.
§
Specify a paper size that
is appropriate to the
original document.
The original document is
not placed in the proper
orientation on the original
glass.
§
Place the original
document correctly on
the original glass.
Unintended markings
appears along the edge of
the copy.
The zoom ratio setting
does not match the size of
the original document.
§
Select a suitable zoom
ratio setting.