manualshive.com logo in svg

Konica Minolta FK-116, User Manual

Share
Download
Konica Minolta FK-116 User Manual Download Page 139

Enhanced Utility Functions

5-24

  GROUP NAME = USA

JAN.04       18:50        100%

- SET DOC.FACE UP -

 * MEMORY *                96%

       USA                            5

  

 

(USA                     ) 96%

-SET DOC. FACE UP-

    

TX CANCEL?

YES/CONTINUE=NO

  NO.002=_

If you want to continue selecting
destinations using Phone Book, repeat steps
19 through 25.

26.

 

The Message Display now shows the destination you selected. When all parties
have been selected for Group Dial, press the Start key.

27.

 

To exit from Group Dial registration, press
the No/Clear key twice.
The initial screen will appear.

Using the Group Dial

1.

 

Place the document face up on the Document
Feeding Tray.

2.

 

Press the One Touch key in which the
desired Group Dial has been registered.
For example:
One Touch key 17 

→

USA group

The document placed on the Document
Feeding Tray is fed once and scanned into
memory.

When scanning is completed, the machine
starts dialing the destinations, one by one, in
the order they were registered.

Upon connecting to the destination, the document in memory is transmitted.

The document transmission sequence is repeated for the number of destinations
registered in that particular group.

3.

 

To stop the transmission, press the Stop key,
and then the Yes key.

Stop

Yes

Summary of Contents for FK-116

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands