Konica Minolta FK-116, User Manual

Page: 198 / 216

Troubleshooting
9-2
Message Possible cause What to do
PAPER SIZE ERROR
The paper installed is not
correct
§
Be sure you have installed
the correct paper size, then
press any key to release the
ERROR state, and then
press Start key to resume
this machine. After
warming up, this machine
would print the last copy
again.
§
Or, change the paper size
setting.
í
P 5-10
* CAUTION! *
TONER EMPTY
Out of Toner
§
Replace new Toner.
* CAUTION! *
ADF COVER OPEN
ADF cover is open
§
Close the ADF cover.
SERVICE CALL
( CXXXX )
A hardware related error
occurred.
§
Try turning the power OFF
then ON.
§
If this error is displayed
again, contact your service
agent.
* REDIAL ALL FAILED *
The document is not
transmitted to the other
party even through
repeated auto redial.
§
Press the Stop key, then try
another transmission
sequence.
§
At transmission
Press the Stop key, and
then the Yes key. Then try
another transmission
sequence.
* COMM.ERROR *
An error has occurred and
communication was
unsuccessful.
§
At reception
Ask the other party to try
another transmission.
* NOT REGISTERED! *
There is no destination
information registered in
the One Touch key or
Speed Dial you have just
pressed.
§
Select the One Touch key
or Speed Dial, which
contains the information of
the destination you are
trying to send.
§
Or register a new One
Touch Dial or Speed Dial .
í
P 5-14
* WRONG NUMBER SET *
The date or time has been
set incorrectly.
§
Make the correct setting.
í
P 1-16
* WRONG PAGE COUNT *
The number of pages of
the document transmitted
does not equal the number
of pages set with Page
Count TX.
í
P 2-24
§
Check the number of pages
again and retry the
transmission.
* WRONG ID NUMBER *
The specified ID number
is not set.
§
Enter the correct ID
number.