manualshive.com logo in svg

Konica Minolta FK-116, User Manual

Share
Download
Konica Minolta FK-116 User Manual Download Page 212

Troubleshooting

9-16

PRESS THE START KEY

TO RESUME

RETURN 1 ORIG.to ADF

 and PRESS START KEY

*COPY CANCELED*

*CAUTION!*

PAPER SIZE ERROR

 *PRINT DOC.*                80%

-SET DOC.FACE UP-

2.

 

Press any key, then the message may appears:

Press the Start key to resume
the machine.

Return the last scanned document
into ADF again.

Then press the Start key to
resume the machine.

If you want to cancel the copy procedure press the Stop
key.

3.

 

The machine continues to perform the copy
procedure.

2) In Reporting or Printing reception

Before PAPER SIZE ERROR occurs, the display may display as below.
For example: During the machine printing the reception data.

When the PAPER SIZE ERROR occurs

Start

Start

Stop

  TEXT         

            12

  

       

Summary of Contents for FK-116

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands