manualshive.com logo in svg

Konica Minolta FK-116, User Manual

Share
Download
Konica Minolta FK-116 User Manual Download Page 30

About Your Machine

1-19

JAN.01  15:38       100%

-SET DOC. FACE UP-

INITIAL USER DATA?

  OK=YES / or 1-3

4. Check your data entry and press the Yes key
to accept the name setting.

5. Press the No/Clear key to back the initial
screen.

                      Copy  screen                                                Fax  screen

Connecting to the Telephone Line

Arrangement:

NOTE:
1.

 

Connection should be done by a service technician.

2.

 

Telephone cord accessories will vary: Type A, Type B, Type C, Type D,
depending on the requirements of the country.

3.

 

The ground wire  (E) is available in a version intended for a specific country.
(For example: Germany)

4.

 

A standard telephone can be connected, if necessary.

    TEXT          

          1

     

       

Yes

 C

 No

Summary of Contents for FK-116

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands