manualshive.com logo in svg

Konica Minolta FK-116, User Manual

Share
Download
Konica Minolta FK-116 User Manual Download Page 126

Enhanced Utility Functions

5-11

 8 TRAY 1 PAPER SIZE

    * A4                   A5

      

,  

 

 &  YES

 * LT            LG            HL

    

,  

 

 &  YES

1.

 

Press the Utility key, then the message
“MACHINE SETTING” appears.

2.

 

Press "8" from the Numeric keys. The following
message appears briefly to confirm your
selection.

3.

 

Press   or   key to select A4 or A5 as the
default setting.

For USA/Canadian marketing area:
Press   or   key to select Letter, Legal or
Half-Letter as the default setting .
(Half Letter is available when Tray 2 is
installed.)

Press the Yes key.

4.

 

Press the No/Clear key to restore the initial
state.

Setting PAPER SOURCE

This function allows you to specify the paper source for the COPY operation and the
FAX operation. (When the optional Paper Feed Unit is installed)

NOTE: In FAX operation only the paper tray with A4, Letter and Legal

are available.

 No
C

MACHINE SETTING?

   OK=YES / or 1-9

Utility

8

TUV

Yes

MACHINE SETTING?

   OK=YES / or 1-9

Summary of Contents for FK-116

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands