manualshive.com logo in svg

Konica Minolta FK-116, User Manual

Share
Download
Konica Minolta FK-116 User Manual Download Page 112

Utility Functions

4-26

   FUNCTION

SEL. 1-8 / or FUNCTION

MEMORY DATA LIST?

  OK=YES (NEXT=CONF.)

TX RESULT REPORT?

  OK=YES (NEXT=CONF.)

Cancel Reserve.

Overview of the Cancel Reserve function

Cancel Reserve cancels a transmission reservation for a document previously stored in
memory for Timer TX, Broadcast TX, and Polling TX.

How to use the Cancel Reserve function

1) Checking the Documents Reserved for Transmission

1.

 

Press the Confirm key 3 times. The message "
PRINT REPORT?" appears.

2.

 

Press the Yes key.

3.

 

Press the Confirm key 3 times.
The message "MEMORY DATA LIST" appears.

4.

 

Press the Yes key.
The machine prints a Memory Data List. 

í

 P 8-13

Go over the list and identify the documents reserved for transmission and the
particular FUNCTION features specified.

Print a Memory Image Print if you want to check for the contents of a particular
reserved document. 

í

 P 8-14

2) Canceling the Document Reserved for Transmission

1.

 

Press the Function key.

Confirm

x 3

Yes

Confirm

x 3

Yes

Function

PRINT REPORT?

  OK=YES

Summary of Contents for FK-116

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands