Konica Minolta Di5510, Advanced Information

Page: 443 / 488

Troubleshooting 8
Di5510/Di7210 8-1
8 Troubleshooting
8.1 If Your Copy Is Incorrect
Symptom Possible Cause Action
The copy is too light.
The exposure is set too light. Change the basic options for
exposure.
See page 4-52.
Manually brighten or darken the
exposure for the copy. See
page 4-49.
The exposure was manually set
to too light a value. Manually brighten or darken the
exposure for the copy. See
page 4-49.
The paper is damp. Replace the paper.
The toner has run out. If the message Add toner
appears, add toner. See page 2-
54.
The paper is not loaded
correctly. Load the paper correctly. See
page 2-43.
The copy is too dark.
The set exposure level is too
dark. Change the basic options for
exposure.
See page 4-52.
Manually brighten the exposure
of the copy. See page 4-49.
The original glass is dirty. Clean the original glass.
See page 9-2.
The original is not flat against the
original glass. Place the original correctly on
the original glass. See page 3-8.
The copy is blurred.
The paper is damp. Replace the paper.