Konica Minolta Di5510, Advanced Information

Page: 139 / 488

Initial Steps . . . 3
Di5510/Di7210 3-43
3.11 Enabling Energy Saving Modes
While the system is not being used, enable one of two available energy
saving modes to reduce the power consumed by the system.
The system provides two features for saving energy:
G
Energy Saving Mode
In energy saving mode, the temperature of the fixing unit is reduced to
a low level when the system is idle.
G Automatic Shut Off
Specific parts of the system are shut off with automatic shut off.
Both of these modes can be enabled automatically and manually.
One button for two modes
The energy saving function is activated manually on the control panel
by pressing [Energy Saver]. This button can be set up to activate either
energy saving mode or auto shut off mode. Use the key operator mode
to configure which energy saving mode is triggered when this button
is pressed.
For more information, see page 7-50.