Konica Minolta Di5510, Advanced Information

Page: 58 / 488

2 Getting to Know Your System
2-30 Di5510/Di7210
Space Required for System
CAUTION
Device damage by incorrect assessment of space requirements
Always ensure sufficient free space around the system. Too little space
can cause damage to the system, for example from overheating.
Furthermore operation is hindered by too little free space.
§ Leave sufficient space between the back of the device and the wall to
ensure adequate ventilation.
§
Do not place any objects under the main finisher tray or under the Shift
Tray OT-104. The trays are lowered during the output cycle. Objects
below the offset trays may seriously damage them.
480
1140
1620
400
490
100
400
650
1640
1836
766 950
120
480
1140
1620
400 475 650
1525 1836
766
950
120
Units in mm
Di5510/Di7210
Di5510/ Shift tray OT-104