Konica Minolta Di5510, Advanced Information

Page: 389 / 488

Settings in Key Operator Mode 7
Di5510/Di7210 7-19
7.5 (4) E.K.C. Function Setting
You can use the E.K.C. counter to manage the copier activities of up to
1,000 E.K.C. accounts with password-protected access.
When the E.K.C. is enabled, the system can be used only with a code.
Copies can then be managed based on this code. To avoid excessive
copying, each E.K.C. account can be assigned a copy limit.
The E.K.C. significantly simplifies the calculating of copy costs.
In the key operator mode, the settings for the E.K.C. can be protected with
a master code. The master access code can only be set up by a service
technician. To take advantage of this feature, contact your technical
representative.
Calling up E.K.C. Mode
Call up E.K.C. mode to change the settings for the E.K.C. counter
1
Call up key operator mode.
The key operator mode menu is displayed.
2
In the key operator mode menu press the [4] E.K.C. function key.
A submenu appears. You are now in E.K.C. mode.
or
The window prompting for the master code appears.
3
only with master code prompt
Input the 8-digit master code with the touch screen keypad and
confirm your input with [OK].
You are now in E.K.C. mode.
? Master code not accepted?
§ Re-enter the master code and confirm your selection with [OK].
§ If the master code still is not accepted, find out whether the code
has been changed.