Kodak RP 30, Operator'S Manual

Page: 31 / 235

Operator’s Guide
System Start
After automatic or manual switch-on, the equipment heats the solutions and the dryer
to nominal temperatures. During this phase, the monitor displays:
•
The progress of the startup / heating up in percent
•
The remaining time until the machine is ready to operate
•
Any error messages
•
The Stop button to shut down the equipment correctly any time during the start-up
process
The equipment is ready for operation after the solutions and the dryer have reached
nominal temperatures.
Readiness for Operation
User Login
After the equipment has been switched on and heated up, the Login screen appears,
where you enter your user name and password (four numbers). The user name is
preset if you have been defined as the first user who must enter a password.
After you enter the user name (if required) and password, the Start screen appears.
The Start screen appears immediately after warm-up if the first user is logged in
automatically (the system does not check for a password). The Start screen also
appears after a new user has logged in.
2-12 KODAK PROFESSIONAL RP 30 Laser Printer