Kodak RP 30 Operator'S Manual Download Page 208

Page: 208 / 235

Operator’s Guide

Removing the V Wiper and Squeegee Unit

NOTE: The squeegee unit consists of a guide section and a holder for the V wiper.

The holder must be unlocked on both sides to remove it.

1. Grasp the squeegee unit by the tabs and remove it.

2. Unlock the holder for the V wiper on both sides and lift it out of the squeegee

unit.

3. Put both parts in the lab basin.

4. Close the paper processor cover.

Cleaning

Clean the CD feed unit, tank crossovers, and the squeegee unit and V wipers before
starting to work after the weekend.

1. Clean the CD feed unit and tank crossovers.

a. Clean the rollers in the lab basin with a soft brush.
b. Clean the paper slide surfaces with a lint free cloth.

8-16

KODAK PROFESSIONAL RP 30 Laser Printer

Summary of Contents for RP 30











































































































































































































































Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands

Kodak RP 30, Operator'S Manual

Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands