Kodak RP 30 Operator'S Manual Download Page 219

Page: 219 / 235

Maintenance

Cleaning the Processing Racks

Purpose: To ensure optimum processing quality.

WARNING:

CAUTION:

Wear protective gloves, a rubber apron, and goggles when you
clean the processing racks.

Chemical splashes may stain the covers. Use the splash guard
(1) or remove splashes immediately with water.

1. Remove the CD (Color Developer) feed unit, the tank crossovers and the

squeegee unit.

2. Put the splash guard (2) on the CD rack to prevent the CD solution from being

contaminated by BX.

3. Open the rack locks. Lift the racks SB1 to SB4 and let the excess chemical

solution drip from the racks.

KODAK PROFESSIONAL RP 30 Laser Printer

8-27

Summary of Contents for RP 30











































































































































































































































Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands

Kodak RP 30, Operator'S Manual

Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands