Kodak RP 30 Operator'S Manual Download Page 192

Page: 192 / 235

Operator’s Guide

CAUTION:

Chemical splashes may stain the covers. Use the splash guard
(1) or remove splashes immediately with water.

3. Remove the CD (Color Developer) feed unit, the tank crossovers and the

squeegee unit.

4. The CD solution must not be contaminated by bleach-fix. Therefore, put the

splash guard (2) on the CD rack.

5. Open the rack locks. Lift the racks SB1 to SB4 and let the chemical solution drip

from the racks.

6. Lift the BX (bleach-fix) rack far enough so that the hinged holding plate can rest

on the metal bracket to let the chemical solution drip from the rack.

7-22

KODAK PROFESSIONAL RP 30 Laser Printer

Summary of Contents for RP 30











































































































































































































































Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands

Kodak RP 30, Operator'S Manual

Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands