Kodak RP 30, Operator'S Manual

Page: 137 / 235

Tests
You can use the Settings menu (see Chapter 4) to set up how often the automatic
PBL should be repeated if the values continue to be out of tolerance after retries. The
number of retries can be from 1 to 10.
PBL Test with Laser Point
The laser point is used to set the exposure levels required to produce the desired
D-max value of the paper being tested.
NOTE: You can press [Alt] + [F1] to set the D-max for a paper. The PapersData
dialog box appears.
Select the desired paper from the drop-down list and adjust the “Max.
Density” and “Color Balance” as needed. Click
Save , and then Close .
The values shown above are for KODAK PROFESSIONAL Digital III Papers.
Different values will be required for new paper types as they are introduced.
Activate the box with Laser point .
Upon first calibration of a paper, the PBL is automatically printed with laser point if
the cassette code indicates that a paper is used for the first time.
KODAK PROFESSIONAL RP 30 Laser Printer 5-5