Kodak RP 30, Operator'S Manual

Page: 86 / 235

Settings
Coding the Paper Magazine
The paper magazine is coded for the paper width (1-4) and the surface (5-6) in use.
The meaning of the coding is described below.
Slide closed
■
Slide open
Width Indicators Surface Indicators
Paper Width
1 2 3 4 5 6
3.25 inch (82 mm)
3.50 inch (89 mm)
3.75 inch (95 mm)
4.00 inch (102 mm)
4.75 inch
(120 mm) GLOSSY
5.00 inch (127 mm) MATTE
6.00 inch (152 mm) CUSTOM1
6.50 inch (165 mm) CUSTOM2
7.00 inch (178 mm)
8.00 inch (203 mm)
8.25 inch (210 mm)
8.50 inch (216 mm)
10.0 inch (254 mm)
11.0 inch (279 mm)
12.0 inch (305 mm)
NOTE: The table shows the Kodak standard. If required, a different allocation of the
switches to paper widths and surfaces can be defined. Each switch
combination can only be used once. (See
Paper Configurations on
Page 4-44 .)
When the magazine is in place, the system recognizes the paper width and the paper
surface, and offers the corresponding sizes in the print menus for selection.
KODAK PROFESSIONAL RP 30 Laser Printer 4-19