Kodak RP 30 Operator'S Manual Download Page 210

Page: 210 / 235

Operator’s Guide

Checking the Solution Levels

Purpose: To compensate for evaporation (also required with the automatic
evaporation compensation).

Check the solution levels in the paper processor and top up with water once a week
before starting production.

If the level drops considerably:

1. Adjust the settings of the water replenishment to the required level.

2. Replace defective level switches (service technician).

3. Search for leaks (service technician).

WARNING:

The risk of fire exists if the level switches become defective.
Have defective level switches replaced immediately. Do NOT
attempt to repair them.

Cleaning the Chemical Filters

Purpose: To ensure uniform circulation of the processing solutions by regular
cleaning of the filters.

Clean chemical filters:

1. Remove the chemical filters once per week and clean with warm water and a soft

brush.

2. Reinstall the chemical filters in the color-marked order.

8-18

KODAK PROFESSIONAL RP 30 Laser Printer

Summary of Contents for RP 30











































































































































































































































Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands

Kodak RP 30, Operator'S Manual

Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands