manualshive.com logo in svg

Kodak RP 30, Operator'S Manual, Page: 40 / 235

Share
Download
Kodak RP 30 Operator'S Manual Download Page 40

  

Overview 

Information Area 

The Information area includes the fixed buttons (

i

, 

?

, and 

Stop

) and the status line.  

 

Because the fixed buttons are always accessible, you can open the Info and Help 
screens at any time. For more information, see

 Info 

on

 Page 2-34 

and

 Help

 on 

Page 2-40.

 

The fixed buttons are described below.  

i

  

Status information 

?

 

Context-related help function for all screens and error messages 

Stop

   If the system does not respond to operator entries, you can use this button to 

initiate a software reset. The entire RP 30 Laser Printer is stopped (orders 
are interrupted and all major assemblies are reset). 

For more information, see 

Resetting the Equipment if an Error Occurs

 in 

Chapter 7. 

The display in the 

status line 

includes: 

• 

Information, warnings, and requests 

• 

Error messages 

The messages in the status line require different actions: 

• 

Some messages let you continue working without confirmation or action. 

• 

Some messages can be ignored several times until the system forces you to act. 

• 

Error messages must be resolved so that the work can be continued. 

KODAK PROFESSIONAL RP 30 Laser Printer 

2-21 

Summary of Contents for RP 30












































































































































































































































Reviews:

No comments