Kodak RP 30 Operator'S Manual Download Page 205

Page: 205 / 235

Maintenance

Cleaning the Paper Processor: CD Feed Unit, Tank
Crossovers, and Squeegee Unit and V Wipers

WARNING:

Risk of injury is possible if the wet section cover is unlocked
unintentionally (when PUSH is pressed).

•

When opening the cover:

Check that the cover lock fully engages in vertical position.

•

When closing the cover:

Support the cover with one hand. Press the unlocking lever
(PUSH), and close the cover.

IMPORTANT:

CAUTION:

To prepare for cleaning, put the crossovers in a lab basin filled with
water over the weekend.

To avoid damage to the rollers and paper guide surfaces, do not
stack the crossovers.

KODAK PROFESSIONAL RP 30 Laser Printer

8-13

Summary of Contents for RP 30











































































































































































































































Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands

Kodak RP 30, Operator'S Manual

Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands