Kodak RP 30 Operator'S Manual Download Page 176

Page: 176 / 235

Operator’s Guide

Image Processing Errors

It is possible to have several images that cannot be printed. However, only the last
image is shown.

Touch

Clear

The types of adjustment for file print are:

•

Fill print

Center crop; image information getting lost.

•

Fit image to paper

The complete image information is shown and a border is added.

Fill print

is selected, the aspect ratio of the frame must approximately correspond

to that of the print size. If there are larger differences, the error message

Parameter

range violation

appears. The image can then only be printed with

Fit image to

paper

Paper Processor Errors

Some errors cause the printer to stop. If paper is still in the transport area of the
printer, it must be removed before the work can be continued.

If an error occurs during a reset, a message appears indicating unresolved errors.
These active errors must be cleared from the error list.

1. Deactivate the option

Show all errors

to display only active errors.

2. Perform

reset.

7-6

KODAK PROFESSIONAL RP 30 Laser Printer

Summary of Contents for RP 30











































































































































































































































Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands

Kodak RP 30, Operator'S Manual

Search results

Summary of Contents for RP 30

Reviews:

Related manuals for RP 30

Brands by name

Popular brands