Keysight Technologies N6705C, Operating And Service Manual

Page: 184 / 476

Refer to Non-Volatile Settings for information on the factory-shipped LAN settings.
Host Name
A hostname is the host portion of the domain name, which is translated into an IP address. Use the
numeric/alpha keys to enter letters or numbers. Repeatedly pressing a key cycles through the list of
choices. After a short delay the cursor automatically moves to the right..
l
Host name - This field registers the supplied name with the selected naming service. If the field is
left blank, no name is registered. A hostname may contain upper and lower case letters, numbers
and dashes(-). The maximum length is 15 characters.
Each power analyzer is shipped with a default hostname with the format: Keysight-modelnumber-
serialnumber, where modelnumber is the mainframe’s 6-character model number (e.g. N6705C),
and serialnumber is the last five characters of the 10-character mainframe serial number located
on the label on the top of the unit (e.g. 45678 if the serial number is MY12345678).
mDNS Service
The mDNS service name is registered with the selected naming service.Use the numeric/alpha keys to
enter letters or numbers. Repeatedly pressing a key cycles through the list of choices. After a short
delay the cursor automatically moves to the right.
l
mDNS Service Name - This field registers the service name with the selected naming service. If
the field is left blank, no name is registered. A service name may contain upper and lower case let-
ters, numbers and dashes(-).
Each power analyzer is shipped with a default service name with the format: Keysight-mod-
elnumber-serialnumber, where modelnumber is the mainframe’s 6-character model number (e.g.
N6705C), and serialnumber is the last five characters of the 10-character mainframe serial num-
ber located on the label on the top of the unit (e.g. 45678 if the serial number is MY12345678).
Get IP Address Automatically - checked
l
Checking this box - automatically configures the addressing of the instrument. When selected, the
instrument will first try to obtain an IP address from a DHCP server. If a DHCP server is found, the
DHCP server will assign an IP address, Subnet Mask, and Default Gateway to the instrument. If a
5 Using the System Functions
184 Keysight N6705C Operating and Service Guide