Keysight Technologies N6705C, Operating And Service Manual

Page: 17 / 476

4. Source keys - Programs the source function – Source Settings or Arbitrary waveform. Arb Run-
/Stop key starts or stops the arbitrary waveform function.
5. Menu, Properties, File keys - Menu key accesses all mode controls via a hierarchical command
menu. Properties key displays information specific to the active view (this is a menu shortcut). File
key lets you save the current display, instrument settings, and measurements.
6. Navigation keys - Navigate through the control dialog windows; press the Enter key to select a
control. Back key cancels the values entered into the dialog and backs out of the control.
7. Numeric/Alpha Entry keys - Enters numeric and alpha values. Alpha keys automatically become
active on fields that allow alpha character entry. Repeatedly pressing the key scrolls thorough the
selections.
8. Voltage/Current knobs - Sets the voltage and current of the selected output.
9. Select Output keys - Selects an output to control. The lit key indicates the selected output.
10. Emergency Stop - Turns off all outputs without any delays; aborts any arbitrary waveforms.
11. Memory port - USB Memory device connector. Option AKY deletes the connector.
12. On Keys - Turns individual outputs On or Off; outputs are on when the key is lit.
13. Binding posts - The + and – output and sense binding post terminals for all outputs.
14. 4 Wire - Indicates that 4 Wire sensing is enabled on the output.
15. All Outputs On/Off keys - Turns all outputs On and Off according to the specified turn-on and turn-
off delay.
16. Waveform Display controls - Controls the scope and data logging views.
Vertical knobs control the vertical size and position. Press Offset to set marker 1. Horizontal knobs
control the horizontal size and position. Press Offset to set marker 2. The Trigger knob moves the
trigger level up or down. Press this knob to autoscale.
Keysight N6705C Operating and Service Guide 17
1 Quick Reference