Section 2: General operation
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
2-130
DMM7510-901-01 Rev. B / May 2015
Figure 95: Rear panel connections: Digitize current measurement (current below 3 A)
Figure 96: Rear panel connections: Digitize current measurement (current below 10 A)
Measure with digitize current using the front panel
To make a digitize current measurement using the front panel:
1. Make the connections as shown in the previous figures.
2. Press the
FUNCTION
key.
3. Select the
Digitize Functions
tab.
4. Select
Digitize Current
.
5. Press the
TRIGGER
key for 2 seconds and verify that the instrument is set to Continuous
Measurement.
The measurements start displaying on the front panel.
Settings available for digitize current measurements
See
Digitize current measure settings
(on page 2-33) for settings that are available when you are
digitizing current measurements.
