Keithley DMM7510, Reference Manual, Page: 453 / 1036

Section 6: SCPI command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
6-126 DMM7510-901-01 Rev. B / May 2015
Trigger events
Event description Event constant
No trigger event NONE
Front-panel TRIGGER key press DISPlay
Notify trigger block
<n>
(1 to 8); the trigger model generates a
trigger event when it executes the notify block
NOTify<n>
A command interface trigger (bus trigger):
•
Any remote interface: *
TRG
•
GPIB only: GET bus command
•
VXI-11: VXI-11 command
device_trigger
COMMand
Line edge (either rising, falling, or either based on the
configuration of the line) detected on digital input line
<n>
(1 to 6)
DIGio<n>
Line edge detected on TSP-Link synchronization line
<n>
(1 to 3) TSPLink<n>
Appropriate LXI trigger packet is received on LAN trigger object
<n>
(1 to 8)
LAN<n>
Trigger event blender
<n>
(1 or 2), which combines trigger events BLENder<n>
Trigger timer
<n>
(1 to 4) expired TIMer<n>
Analog trigger ATRigger
External in trigger EXTernal
Example
*RST
:DIG:FUNC "VOLT"
:TRIG:DIG:STIM DISP
:DIG:COUN 10
Reset the instrument.
Set the digitize function to voltage.
Set the digitize trigger stimulus to be the
front-panel TRIGGER key.
Set the digitize count to 10.
Press the TRIGGER key to generate 10
readings.
Also see
:READ:DIGitize? (on page 6-12)
[:SENSe[1]]:DIGitize:FUNCtion[:ON] (on page 6-123)