Section 6: SCPI command reference
Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
6-214
DMM7510-901-01 Rev. B / May 2015
Example
:TRIG:LAN2:IN:EDGE FALL
Set the LAN trigger mode for event 2 to falling.
Also see
(on page 3-47)
TSP-Link System Expansion Interface
(on page 3-104)
:TRIGger:LAN<n>:IN:OVERrun?
This command indicates the overrun status of the LAN event detector.
Type
Affected by
Where saved
Default value
Query only
TRIGger:LAN<n>:IN:CLEar
Not applicable
Not applicable
Usage
:TRIGger:LAN<n>:IN:OVERrun?
<n>
The LAN event number (1 to 8)
Details
This command indicates whether an event has been ignored because the event detector was already
in the detected state when the event occurred.
This is an indication of the state of the event detector built into the synchronization line itself. It does
not indicate if an overrun occurred in any other part of the trigger model, or in any other construct that
is monitoring the event.
It also is not an indication of an output trigger overrun.
The trigger overrun state for the specified LAN packet is returned as
1
(true) or
0
(false).
Example
TRIG:LAN5:IN:OVER?
Checks the overrun status of a trigger on LAN5
and outputs the value, such as:
0
Also see
(on page 6-213)
