Keithley DMM7510, Reference Manual

Page: 639 / 1036

Section 8: TSP command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
8-26 DMM7510-901-01 Rev. B / May 2015
bufferVar.endindex
This attribute indicates the last index in a reading buffer.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R) Yes Restore configuration
Instrument reset
Power cycle Not applicable Not applicable
Usage
bufferVar .endindex = endIndex
endIndex Ending index of the buffer
bufferVar The name of the reading buffer, which may be a default buffer (
defbuffer1
or
defbuffer2
) or a user-defined buffer
Details
Use this attribute to find the ending index in a reading buffer.
Example
test1 = buffer.make(100)
dmm.measure.count = 6
dmm.measure.read(test1)
print(test1.startindex, test1.endindex, test1.capacity)
dmm.measure.read(test1)
print(test1.startindex, test1.endindex)
Create a buffer named
test1
with a capacity of 100 readings.
Set the measure count to 6.
Make measurements and store them in buffer
test1
.
Get the start index, end index, and capacity of
test1
.
Output:
1, 6, 100
Make six more measurements and store them in buffer
test1
.
Get the start index and end index of
test1
.
Output:
1, 12
Also see
bufferVar.startindex (on page 8-36)
buffer.make() (on page 8-18)
Reading buffers (on page 3-13)
Remote buffer operation (on page 3-30)