Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual
Section 2: General operation
DMM7510-901-01 Rev. B / May 2015
2-109
Figure 73: Rear panel connections: 2-wire resistance measurement
Measure 2-wire resistance using the front panel
To make a 2-wire resistance measurement using the front panel:
1. Make the connections as shown in the previous figures.
2. Press the
FUNCTION
key.
3. Select
2W Res
.
4. If the measurement method is set to continuous, the measurements start displaying on the
front-panel display.
If the measurement method is set to manual or trigger model, press the
TRIGGER
key to make a
measurement.
Settings available for 2-wire resistance measurements
See
2-wire resistance measure settings
(on page 2-27) for settings that are available when you are
making 2-wire resistance measurements.
