Kärcher BR/BD 45/40 W Bp Pack, Original Instructions Manual

Page: 34 / 604

-
10
the cleaning program. The settings are
done using the Info button.
Î
Release emergency-stop button by
turning.
Î
Set main switch to “1”.
Î BR/BD...C...: Turn the program selec-
tion switch to the desired cleaning pro-
gram (1...5).
BR/BD... W...: Set the traction switch to
"1“ or programme selection switch to
the desired cleaning programme (1...6).
The display shows the battery charging
status.
Î Select the desired parameter by turning
the Info button. The currently set value
is displayed.
Î Press Info button, the value/ bar flashes.
Î Reset the parameter by turning the Info
button between "min" and "max".
Î Confirm the changed setting by press-
ing the Info button or wait till the set val-
ue is automatically accepted after 10
seconds.
Note
If the selected parameter does not change
within 10 seconds, then the display goes
back to displaying the battery charging sta-
tus.
The cleaning parameters can be set and
are applicable to all programmes.
All settings are saved even in the power-
less state of the machine.
Î Set cleaning programme wet scrubbing,
suction, polishing, scrubbing or polish
suction using the programme selection
switch.
Î
Select the menu item "Factory setting"
in the operator menu by turning the Info
button
Î Press Info button. The factory settings
of all parameters are restored for each
cleaning program.
*) The cleaning performance can be set in
3 stages:
–
Fine Clean: Lower brush speed for re-
moving the grey film on fine stone
floors.
–
Whisper Clean: Medium brush speed
for regular cleaning with reduced noise
level.
–
Power Clean: High brush speed for pol-
ishing, crystallising and sweeping.
The table given below gives details of the
factory settings of the parameters for the
cleaning programs. If no values are en-
tered, then the respective parameter can-
not be set in the given cleaning program.
Operator menu
Reset parameters
Adjustable pa-
rameters min:step:m
ax Remark
Detergent dos-
ing (DOSE) 0,5% : 0,5%
: 3% Ideal deter-
gent con-
centration
Only BR...:
FACT*) (brush
speed) – Power
Clean,
Whisper
Clean, Fine
Clean
Cleanspeed 0 : 1 : 5 Driving
speed
Factory setting
Detergent dosing Clea
nspee
d
F
ACT
(b
rus
h
sp
eed
)
Scrubbing suction 1 3 p
Wet scrubbing
Dry vacuum clean-
ing
– –
Polishing p
Polish suction
Driving
– –
*) Only BR...: P=Power Clean
34 EN