JVC GY-HM850CHE Instructions Manual Download

Page: 49 / 220

Basic Shooting

Procedures

Preparations

Attach the necessary accessories.

(

P28 [Settings and Adjustments Before

Use] )

Supply battery or AC adapter power to the

camera recorder.

(

P30 [Power Supply] )

Insert an SD card.

(

P43 [SD Card] )

Turn on the power of the camera recorder.

Setting the [POWER ON/OFF] switch to “ON”

starts up the camera recorder in the Camera

mode to enable shooting.

Adjust the angle of the LCD monitor and

viewfinder.

(

P38 [Adjusting the LCD Monitor and

Viewfinder] )

Shooting

Configure the video and audio input

settings.

You have to configure video settings such as

brightness adjustment (iris, gain, shutter) and

white balance adjustment in order to start

shooting. You also have to adjust the audio

input settings and audio recording level for

audio recording.

Adjusting the Brightness

(

P57 [Adjusting the Brightness] )

Adjusting the White Balance

(

P63 [Adjusting the White Balance] )

Adjusting Audio Input Settings and

Recording Level

(

P69 [Audio Recording] )

Press the [REC] button to start recording to

the SD card.

This camera recorder has three [REC] buttons.

Any of the [REC] buttons can be used to start/

stop recording by default.

The front and back tally lamps light up in red

during recording.

Zoom Operation

(

P52 [Zoom Operation] )

Adjusting the Focus Manually

(

P53 [Focus Operation

] )

Memo :

If both the slots are loaded with recordable cards

in the factory default, pressing the [REC] button

starts recording only to the media in the selected

slot.

When [Main Menu]

[System]

[Record Set]

[Slot Mode] is set to “Dual”, recording can be

performed simultaneously to the cards in both

the slots.

(

P85 [Dual Rec] )

The tally lamps can be turned off in the [System]

[Front Tally]/[Back Tally] menu.

(

P130 [Front Tally/Back Tally] )

Check the most recently captured images.

Press the user button assigned with the [Clip

Review] function to activate the Clip Review

function. The most recently captured images

are played back on the LCD monitor and

viewfinder screen.

After playback, the camera recorder returns

to standby mode (STBY).

(

P83 [Viewing Recorded Videos

Immediately (Clip Review)] )

Basic Shooting Procedures

ooting

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands