JVC GY-HM850CHE Instructions Manual Download

Page: 98 / 220

Time Code Playback

Time code or user’s bit recorded on an SD card can

be displayed on the LCD monitor and viewfinder.
Memo :

The time code is also superimposed on the

video signal output from the [HD/SD SDI] output

terminal.

User’s bit output from the [HD/SD SDI] output

terminal is used as a flag to determine valid

video signals. Therefore, accurate values will

not be output.

If a section without time code is played back, the

time code will stop. However, playback will

continue.

Displaying Information during Shooting

Pressing the [DISPLAY] button during playback

displays the display screen.

Pressing the [F.ASSIST/4] button each time

changes the shooting information displayed (not

displayed, camera information display, GPS

display).

The GPS display displays information on the

recording location of the video being played

back only when GPS information has been

recorded.

The local date/time is displayed.

Camera information display displays only

information of Gain, Iris, Shutter and White

Balance that have been recorded.

13000K

1/ 100

F1. 6

+35.483197

+139.652172

Oct 30,2014

07:01:58PM

GPS Display

Camera Information Display

Hide

Memo :

When [System]

[Record Set]

[Record

Format]

System is set to “HD+SD” or “HD

+Web”, only SD or web files can be played back

from slot B.

In this case, files up-converted into the HD size

are played back in the simple mode.

Trimming information is displayed while

trimming is in progress. In this case, pressing the

[F.ASSIST/4] button does not switch the display.

Deleting Clips

Delete clip.

Memo :

Clips appended with OK marks cannot be

deleted on the camera recorder.

Read-only clips can be deleted on a PC.

Deleting One Clip

Delete the clip (one clip) pointed by the cursor in

[Delete Clips]

[This Clip] in the menu.

Memo :

Clips with OK mark cannot be deleted.

During Thumbnail Screen

Move the cursor to the clip to be deleted.

Move the cursor to the clip to be deleted using

the cross-shaped button (

JKH

218G0005

Jan 7, 2014 07:08:43PM

Press the [LOAD FILE/3] button.

The action selection screen is displayed.

Playing Recorded Clips

Playback

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands