JVC GY-HM850CHE Instructions Manual Download

Page: 25 / 220

[AUDIO OUTPUT CH-1/3, CH-2/4] Audio

Output Terminal (RCA)

Output terminal for audio signals.

Input audio signals are output during

Camera mode.

Playback audio signals are output during

Media mode.

In the SDI signal input mode, audio signals

superimposed with the SDI input are output.

Memo :

Alarm audio is not output.

[AUX] AUX Input terminal (φ3.5 Stereo Mini

Jack)

(

P69 [Audio Recording] )

[REMOTE2] Remote 2 Terminal

(

P164 [Connecting Wired Remote Control] )

Shoulder Pad Slide Button

For adjusting the shoulder pad position. Press

this button to adjust the shoulder pad

position

to the front or back.

Shoulder Pad

[DEVICE] USB Mini Terminal

(

P160 [Managing/Editing Clips on a PC] )

[HDMI] HDMI Output Terminal

(

P161 [Connecting External Monitor] )

SD Slot

(

P43 [SD Card] )

Card Slot A Status Indicator

[SLOT SELECT] Card Slot Selection Button

For switching the active card slot during

shooting and playback.

SD Card Cover

Card Slot B Status Indicator

[OPEN] SD Card Cover Open/Close Knob

Rear Terminal

Shoulder Belt Mount (x2)

For mounting a shoulder belt (sold separately).

Caution :

Be sure to use a shoulder belt with the strength

to withstand the weight of this camera recorder.

If the shoulder belt is not properly attached, the

camera recorder may fall and cause injuries.

Check the instruction manual provided with the

shoulder belt before using.

Accessory Connection Terminal

Terminal for connecting a KA-M790G

(Multicore Remote Adapter: sold separately) or

other units.

Memo :

When using this terminal, make sure that the

Battery Adapter

is removed.

Battery Loading Folder

The shape varies across the U and E models.

(

P31 [Using a Battery Pack] )

* The E model is used in the illustration here.

Names of Parts

oduction

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands