JVC GY-HM850CHE Instructions Manual Download

Page: 207 / 220

Symptom

Action

No sound during playback.

Is the currently played clip recorded in the Variable Frame Rec mode?

(

P93 [Variable Frame Rec] )

Images on the LCD monitor

and viewfinder screen appear

dark or blurred.

Readjust the brightness of the LCD monitor and viewfinder.

Is the [ND FILTER] switch set to “1/64”?

Is the iris closed?

Is the shutter speed setting too high?

Is the amount of peaking too little? Use the [P/-] button to

adjust the contour for the LCD monitor and the viewfinder screen.

(

P39 [Adjusting the LCD Monitor] )

(

P40 [Adjusting the Viewfinder] )

The [CH-1/CH-2] recording

level adjustment knob does

not work.

Is the [CH-1/CH-2 AUTO/MANUAL] switch set to “AUTO”?

Is the [FULL AUTO] switch set to “ON”?

Is the [FULL AUTO] switch set to “ON”, and [Camera Function]

[FULL AUTO]

[Audio] set to “Auto”?

(

P114 [ Audio ] )

[CH-3/CH-4] audio is not

recorded.

Is the number of recording channels set to “4ch”?

Is [System]

[Record Set]

[Record Format]

[

Format]/

[

Format] set to “AVCHD”? Select a setting other than “AVCHD”.

SD card cannot be initialized

(formatted).

Is the write-protect switch of the SD card turned on?

Make sure that the write-protect switch is turned off.

(

P43 [Write-Protect Switch on the SD Card] )

Battery alarm appears even

after loading a charged

battery.

Is the battery too old?

Menu cannot be operated.

Is the Menu Lock mode turned on?

(

P106 [About the Menu Lock Feature] )

The time code and user’s bit

are not displayed.

Even in Camera mode or Media mode, the time code and user’s bit

may not be displayed depending to the type of display.

Is [LCD/VF]

[Display Settings]

[TC/UB] set to “Off”? To display

the time code or user’s bit, set it to “TC” or “UB”.

(

P123 [ TC/UB ] )

The date and time are not

displayed.

The date and time are only displayed on the Display 1 and Display 2

screens in the Camera mode (during shooting).

(

P145 [Display Screen in Camera Mode] )

Is [System]

[Record Set]

[Time Stamp] set to “On”? To display

the date and time, set it to “Off”.

(

P136 [ Time Stamp ] )

Troubleshooting

207

Others

Summary of Contents for GY-HM850CHE





























































































































































































































Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands

JVC GY-HM850CHE, Instructions Manual

Search results

Summary of Contents for GY-HM850CHE

Reviews:

Related manuals for GY-HM850CHE

Brands by name

Popular brands